AG9 Rail Profile Grinder​

AG9 Rail Profile Grinder

The AG9 Rail Profile Grinder is a machine that is used to grind the leftover metal on the Alumino-thermit welded rail joints. The operation of rough grinding is likely to be started when the rail steel is still in red hot condition after removal of the excess material by weld trimmers. The final grinding operations shall be performed when the rail temperature has cooled to near ambient temperature.

The AG9 Rail Profile Grinder is a powerful machine that is able to grind away the leftover metal quickly and efficiently. The machine is equipped with a variety of grinding wheels, which allows it to grind the metal to a variety of finishes. The machine is also equipped with a dust collection system, which helps to keep the work area clean.

The AG9 Rail Profile Grinder is an important tool for maintaining the safety of railway tracks. By grinding away the leftover metal, the machine helps to ensure that the rails are smooth and free of bumps. This helps to prevent derailments and other accidents.

Here are some of the benefits of using the AG9 Rail Profile Grinder:

  • It is a powerful and efficient machine.
  • It is able to grind the metal to a variety of finishes.
  • It is equipped with a dust collection system.
  • It helps to ensure the safety of railway tracks.
Thermite Welding Equipment

Here are some of the safety precautions that should be taken when using the AG9 Rail Profile Grinder:

  • Always wear safety glasses when using the machine.
  • Make sure that the machine is properly grounded.
  • Do not operate the machine if it is damaged.
  • Be careful not to come into contact with the rotating grinding wheels.

The use of a weld trimmer is a safe, efficient, and effective way to trim the excess metal after welding a joint. This helps to ensure that the rail is properly trimmed and that it is safe to use.